Welcome to MISRAMAC!

MDR 700 Walk Behind Rollers

You will work in maximum energy efficiency with MDR 700 Walk Behind Rollers. With petrol and diesel engine options that comply with European Union emission standards, our cylinders offer economical solutions for works such as road patching, ground smoothing, trenching, pipe laying, parking lot and pavement construction, without the need to use large vehicles. Our products, which have the features required by the European CE safety standards, also offer many original innovations.

With our centrifugal clutch system, which makes your machine work more easily in cold weather conditions and protects the engine from sudden loads, the life and durability of your machine increases. In addition, with this system, your machine can operate without vibration at idle.

Contrary to methods such as chain belts, our rollers not only produce higher torque with our innovative toothed walking mechanism, but also protrude only 7 cm from the toothed edge, providing ideal ease of use for ductwork and similar narrow space works.

All of our MDR 700 cylinders, designed with high quality and maximum efficiency in mind, are under our 2-year warranty.

TECHNICIAL SPECIFICATIONS

Operating Weight --> 900 kg
Drum Diameter --> 40 cm
Drum Width --> 70 cm
Water Tank --> 45 lt
Oil Tank --> 45 lt
Vibration Frequency --> 60 hz
Vibration Force --> 26 kN ( 2600 kg )
Static Linear Power --> 6.3 kg/cm
Dynamic Linear Force --> 16 kg/cm
Compression Area --> 2800 m2/h
Walking Speed --> 0-4 km/h
Climbing Slope --> 40%
Walking --> Hydrostatic
Vibration --> Hydrostatic
Starting --> thread pull / Martian 12V 60 Amps
ENGINE OPTIONS
Gasoline --> Honda GX 390 13.0 Hp
Diesel --> Lombardini 15LD350 7.5 Hp

MT40 PLATE COMPACTOR

Compactor Subplates are is manufactured from Sifero Steel casting. They are guaranteed for 3 years against table breakage.

TECHNICIAL SPECIFICATIONS

Table Dimensions --> 40 X 52 cm
Direction --> Forward
Compressing Capacity --> 530 m2 / h
Climbing --> 30%
Vibration Power --> 18 kN ( 1800 kg )
Fibration Frequency --> 78 hz
Weight --> 90 - 105 kg
Starting --> rope pull mechanism
ENGINE OPTIONS
Petrol --> Honda GX 160 5.5 Hp
Diesel --> Lombardini 15LD225 4.8 Hp

MT50 PLATE COMPACTOR

Compactor Subplates are is manufactured from Sifero Steel casting. They are guaranteed for 3 years against table breakage.

TECHNICIAL SPECIFICATIONS

Table Dimensions --> 50X60 cm
Direction --> Forward
Compressing Capacity --> 660 m2 / h
Climbing --> 30%
Vibration Force --> 26 kN ( 2600 kg )
Fibration Frequency --> 78 Hz
Weight --> 120 - 145 kg
Starting --> rope pull mechanism
ENGINE OPTIONS
Petrol --> Honda GX270 9.0 Hp
Diesel --> Lombardini 15LD315 7.5 Hp

MT60 PLATE COMPACTOR

Compactor Subplates are is manufactured from Sifero Steel casting. They are guaranteed for 3 years against table breakage.

TECHNICIAL SPECIFICATIONS

Table Dimensions --> 60 X 70 cm
Direction --> Forward
Compressing Capacity --> 800 m2 / h
Climbing --> 30%
Vibration Force --> 35 kN (3500 kg)
Fibration Frequency --> 80 Hz
Weight --> 160 - 175 kg
Starting --> rope pull mechanism
ENGINE OPTIONS
Petrol --> Honda GX390 13.0 Hp
Diesel --> Antor 3LD510 12.0 Hp

M13 ASPHALT AND CONCRETE CUTTING MACHINE

TECHNICIAL SPECIFICATIONS

Standard Cutting Depth --> 13 cm
Maximum Cutting Depth --> 15 cm
Blade diameter --> 300 - 450 mm
Control --> semi-automatic - manual
Power Transmission --> Belt - Pulley
Weight --> 120 - 160 kg
Immersion Type --> Mechanical
Water Tank Capacity --> 70 lt
Working --> rope pulling
ENGINE OPTIONS
Gasoline --> Honda GX 390 13.0 Hp
Diesel --> Lombardini 13LD350 7.5 Hp
Electric --> 380V 7.5 Hp

MD18 ASPHALT AND CONCRETE CUTTING MACHINE

TECHNICIAL SPECIFICATIONS

Standard Cutting Depth --> 18 cm
Maximum Cutting Depth --> 20 cm
Blade diameter --> 300 - 500 mm
Progress Type --> semi-automatic - manual
Power Transmission --> Belt - Pulley
Weight --> 120 - 190 kg
Immersion Type --> Mechanical
Water Tank Capacity --> 90 lt
Working --> rope pulling
ENGINE OPTIONS
Gasoline --> Honda GX 390 13.0 Hp
Diesel --> Lombardini 3LD510 12.0 Hp
Electric --> 380V 10 Hp

MD25 ASPHALT AND CONCRETE CUTTING MACHINE

TECHNICIAL SPECIFICATIONS

Standard Cutting Depth --> 23 cm
Maximum Cutting Depth --> 25 cm
Blade diameter --> 300 - 650 mm
Control --> semi-automatic - manual
Power Transmission --> Belt - Pulley
Weight --> 240 - 300 kg
Plunging Type --> Hydraulic
Water Tank Capacity --> 90 lt
Starting --> Marsli 12V 60 Amps
ENGINE OPTIONS
Diesel --> Lombardini 12LD475-2 21.5 Hp
Electric --> 380V 15 Hp

MD30 ASPHALT AND CONCRETE CUTTING MACHINE

TECHNICIAL SPECIFICATIONS

Standard Cutting Depth --> 28 cm
Maximum Cutting Depth --> 30 cm
Blade Cap --> 400 - 900 mm
Control --> semi-automatic - manual
Power Transmission --> Belt - Pulley
Weight --> 350 - 500 kg
Plunging Type --> Hydraulic
Water Tank Capacity --> 80 lt
Starting --> Marsli 12V 60 Amps
ENGINE OPTIONS
Diesel --> Lombardini 9LD625-2 28.5 Hp
Electric --> 380V 28.0 Hp

PT 428 700 mm Trowel Machine

TECHNICIAL SPECIFICATIONS

Trowel Diameter --> 70 cm
Frame Diameter --> 75 cm
Number of Blades --> 4
Blade Angle --> 0 - 20 degrees
Fuel Capacity --> 3.6 lt
Hydraulic Oil Capacity --> 0.6 lt
Fuel Consumption --> 1.8 lt
Dimensions --> 750 x 1700 x 1035 mm
Weight --> 75 kg
Blade Rotation Speed --> 139 rpm
Starting --> rope pull
ENGINE OPTIONS
Petrol --> Honda GX 160 5.5 Hp
Electricity --> 380V 3-4 Hp

PT 436 900 mm Trowel Machine

TECHNICIAL SPECIFICATIONS

Trowel Diameter --> 90 cm
Frame Diameter --> 95 cm
Number of Blades --> 4
Blade Angle --> 0 - 20 degrees
Fuel Capacity --> 3.6 lt
Hydraulic Oil Capacity --> 0.6 lt
Fuel Consumption --> 2.1 lt
Dimensions --> 950 x 2050 x 1040 mm
Weight --> 80 kg
Blade Rotation Speed --> 139 rpm
Starting --> rope pull
ENGINE OPTIONS
Petrol --> Honda GX 200 6.5 Hp
Electricity --> 380V 3-4 Hp

PT448 120 mm Trowel Machine

TECHNICIAL SPECIFICATIONS

Trowel Diameter --> 120 cm
Frame Diameter --> 130 cm
Number of Blades --> 4
Blade Angle --> 0 - 20 degrees
Fuel Capacity --> 3.6 lt
Hydraulic Oil Capacity --> 0.6 lt
Fuel Consumption --> 2.9 lt
Dimensions --> 1180x2250x1100 mm
Weight --> 110 kg
Blade Rotation Speed --> 134 rpm
Starting --> rope pull
ENGINE OPTIONS
Petrol --> Honda GX 270 9.0 Hp
Electric --> 380 V 5-6 Hp

B Series Rebar Bending Machines

TECHNICIAL SPECIFICATIONS

C Series Rebar Cutting Machines

TECHNICIAL SPECIFICATIONS